Automatic gluing machine



Equipment introduction

Working principle of the machine:

1. Apply the glue evenly on the aluminum foil of the iron head slice according to the process requirements;

2. It is required that the applied glue shall be free from sagging;

3. The glue height on the whole aluminum foil slice is consistent;

4. Gluing position is adjustable;

5. Glue coating amount can be set;

6. The sliced aluminum foil shall not be warped or deformed after gluing;

7. Put it on the feeding frame, apply glue on a single strip, collect it on a single strip, and take it away from the whole plate;

8. Gluing speed 5s/pcs;

Up:Fully automatic seat board machine Next:Automatic chemical repair machine
Back to list